单页简介
产品详细
产品名称： YTC3600石油膏压力填充机
发布日期： 2015/9/30 14:35:53
点击数： 82
二维码：
简述：
产品详情
产品介绍
◆ Product Introduction
YTC-3600石油膏压力填充机是本厂根据国外样机，结合国内油膏电缆生产厂家的实际需求，为大对数电缆充填石油膏设计制造的专用设备。本机能对3600对以下通信电缆实现一次性压力填充，不仅大大提高了生产效率，也极大地改善了生产环境，是生产厂家生产油膏电缆的理想设备。
YTC-3600 petroleum jelly pressure filling machine is the special equiment designed and manufactured by our factory for large couple of cable filling petroleum jueely, based on the foreign model machines and combining the actual demand of domestic oil jelly cable manufacturer. This machine can achieve primary pressure filling to communication cables less than 3600 couples, which not only greately improves production efficiency, but also significantly improves production environment, and is the ideal equipment for producing oil jelly cable by manufacturers.
本机结构合理，操作简便，主要电气元件采用进口产品，提高了设备的控制精度及可靠性。本机适用于盘绞式成缆生产线。
The structure of this machine is reasonable with simple operation. The main electrical components use imported products, which improves the control accuracy and reliability of the equipment. This machine is applicable to drum twister laying-up production line.
◆ 特点
◆ Characterisitcs
◆不锈钢结构，长期保持油膏清洁；
◆Stainless steel structure, keeping oil jelly cleaning in the long term;
◆压力腔两侧具有加热溢油区和柔性刮油机构，使模具中溢出的油膏迅速回流到油箱，减去了油膏的浪费，改善了生产环境；
◆Both sides of pressure chamber have heating oil overflow area and flexible scraping mechanism to make the oil jelly overflowed in the mold quickly reflow to oil tank, reducing the waste of oil jelly and improving production environment;
◆复合模具安装定位结构设计合理，便于拆卸更换；
◆Composite die is equipped with positioning structure, of which the design is reasonable and easy to remove and replace;
◆系统设置低液位超温报警功能，出现异常故障自动切断电源，并具声光报警；
◆System sets up low liquid overtemperature alarm function. Power supply is automatically cut off in case of abnormal failure with acousto-optic alarm;
◆邮箱油位由储油设备的供油油泵自动控制，始终保持所需油位。
◆Oil level in oil tank is automatically controlled by oil supply pump of oil storage equipment, and the required oil level is always maintained.
◆ 主要技术参数
◆ Main Technical Parameters
◆ 中心高： 1000±10mm
◆ Height of center: 1000±10mm
◆ 填充对数： ≤3600
◆ Number of couples of filling: ≤3600
◆ 最大线速度： 30m/min
◆ Maximum line velocity: 30m/min
◆ 充缆直径： ≤Ф80mm
◆ Charging cable diameter: ≤Ф80mm
◆ 重量： ~1500kg
◆ Weight: ~1500kg
◆ 外形尺寸（长X宽X高）：3600X1600X1900mm
◆ Dimension (length × Width × Height): 3600X1600X1900mm
◆ 工作压力： 0.8Mpa
◆ Working pressure: 0.8Mpa
◆ 总功率： 38kW
◆ Total power: 38kW
◆ 工作温度： 120℃
◆ Working temperature: 120℃
◆ 油箱容积： 900 L
◆ Oil tank capacity: 900L
上一个： RBJ-135偏心式绕包机
下一个： RCY-1600型熔化储油箱