单页简介
产品详细
产品名称： MH200超高速印字机
发布日期： 2015/9/30 14:22:54
点击数： 134
二维码：
简述：
产品详情
产品介绍
Product Introduction
超高速印字机MH200是被动牵引式油墨印字机，主要用于电线、电缆、PVC软硬管、PU管、尼龙管、热缩管及其他配合挤出机之挤出材料的表面印刷。
Ultra-high speed printer Mh200 is passive traction type of printing ink printer, mainly used for the surface printing of wires, cables, PVC soft and hard pipes, PU tube, nylon tube, heat-shrink tube and other extruded materials of other supporting extruder.
标印内容为：商标、厂名、型号、规格、制造日期、及其性能等。
The printed content include trademark, factory name, model, specification, date of manufacture, its performance, etc.
工作原理：
Operating Principle
利用挤出材料与印字轮之间的摩擦力，带印字轮转动，使印字轮表面的带有油墨的印字内容在被印物上。使用电机带动油墨，表面封盖，并在两侧刮墨，保证高速印字的情况下，油墨不会飞溅。
The use of the friction between extruded materials and printing wheel, with the rotation of printing wheel makes the printing content with printing ink on printing wheel surface on the printed object. Use motor to drive printing ink, the surface is sealed with cover and ink is scrapped on both sides are to ensure the printing ink will not splash under high-speed printing.
主要技术参数:
Main Technical Parameters
本机工作高度 850mm----1150mm
Working Height of the Machine: 850mm----1150mm
适用印字轮外径： Ф100mm
Outer Diameter of Applicable Printing Wheel: Ф100mm
适用印刷范围： Ф0.5mm-----Ф15mm
Applicable Printing Scope: Ф0.5mm-----Ф15mm
印字机轴径： Ф20mm
Printer Shaft Diameter: Ф20mm
印字速度： ≤800m/min
Printing Speed: ≤800m/min
压轮上下调节距离： 20mm
Upper and Lower Adjustment Distance of Clamping Roller: 20mm
压轮前后调节距离： 20mm
Front and Rear Adjustment Distance of Clamping Roller: 20mm
导向轮上下调节距离： 40mm
Upper and Lower Adjustment Distance of Guide Wheel: 40mm
导向轮前后调节距离： 40mm
Front and Rear Adjustment Distance of Guide Wheel: 40mm
上一个： MH100高速印字机
下一个：没有资料